home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Software USA 5 #5
/
Software USA Volume 5.05.iso
/
pc
/
utility
/
year2000
/
install
/
y2k.txt
< prev
Wrap
Text File
|
1998-05-01
|
1KB
|
48 lines
Instructions for Y2K Tester
(IT IS RECOMMENDED THAT YOU PRINT THIS)
After completing the installation from the Smart-CD browser, you will
need to run Y2K from DOS. * * IT WILL NOT RUN IN WINDOWS * *
TO EXIT TO DOS:
From Windows 3.1 [Program Manager):
Click FILE
Select EXIT
You will get a message:
ëThis will end your Windows sessioní
Click OK
From Windows 95:
Click the START button
select SHUT DOWN
select RESTART THE COMPUTER IN MS-DOS MODE
then press YES
YOU SHOULD NOW BE IN DOS MODE
Your prompt should look similar to C:\> or C:\WINDOWS>
(If you are not on your C: drive, type C: then press [ENTER])
At this point, type CD\SOFTUSA\YEAR2000 then press [ENTER]
Your prompt should now say C:\SOFTUSA\YEAR2000>
To run the program type 2000 then press [ENTER]
Read the agreement - press Y if you agree, or N if you disagree
(If you select N, the program will terminate at this point.)
Follow the instruction on-screen as the program runs.
After the program has finished, and you are at the
C:\SOFTUSA\YEAR2000> prompt you can safely turn off your computer,
or return to Windows by typing WIN and pressing [ENTER]
(If Windows does not re-start, type CD\WINDOWS and press [ENTER] to change to your
Windows directory, and type WIN and press [ENTER] at the C:\WINDOWS> prompt.)
If you have any problems or questions about this procedure, please call:
Software USA
Technical Support - (619) 455-6033